Think Safety Think Steelmate
Your basket is empty
TP-72I Cig Plug Red Rim display
TP-72I is a stylish internal TPMS for cars with long-life Tandarin batteries.
AUD 299.00
AUD 199.00
Enter your e-mail address to be notified when product is in stock
Notify Me!

 Key Features:
  • Pressure range: 0~116PSI / 0~8.0Bar
  • Red rim warning indicator, LED cigarette lighter plug display
  • Spot on display scrolls every 2 seconds to show the real-time tyre pressure of corresponding tyre
  • Sensors pre-set in factory, no pairing is needed
  • Wireless transmission, no wire connection is needed
  • Intelligent sleeping mode for power saving
  • High temperature and low battery visual and audible warning
  • Fixed pressure unit (PSI or Bar)
  • Long battery life (≥5 years)
Technical Specifications
Professional Sensor:
  • Tandarin Battery
  • Operating Frequency: 433.92MHz ± 0.05MHz
  • Operating Voltage: 2.0~3.8V
  • Operating Temp.: -40°C~+105°C / -40°F ~ + 221°F
  • Battery Life: ≥5 years
  • Weight: 44g ± 1g
  • Operating Frequency: 433.92MHz ± 0.05MHz
  • Operating Voltage: 12 ± 3V
  • Operating Temp: -40°C ~ +85°C / -40°F ~ +185°F

Programming Sensors to the display:
NOTE: ALL TPMS kits & packages sold by us will be pre-programmed so the customer does NOT need to program the sensors. For Internal sensors though, when tyre rotation occurs, the customer will need to program the sensors to the display. There are two methods:

Method 1. Install the sensors, make sure the display is in programming mode (see manual), inflate/deflate the tyres a little according to instructions on the manual. The sensor should register the pressure change and send signals to the display. Save the sensor data on the display.

Method 2. Purchase an internal sensor partner (available on our website). 
Make sure your sensors are installed & display is in programming mode. This device will prompt the sensors to send out the signals without having to inflate/deflate the tyre. Save the sensor data on the display.

Currently there are no reviews for this product.

So what is the programmed threshold where the warning will come on ? And what unit is used to display the pressure BAR or PSI ?

Hi, The default pressure alarm is: below 25PSI and above 47PSI This unit unfortunately does not support individual programming the threshold. The unit displays in PSI.

Does this unit have adjustable threshold? Keith

Hi Keith, Unfortunately this unit does not have adjustable threshold. Regards, Team Carmate

About the Company
Last Visited Products

                    All Rights Reserved. Steelmate Australia & New Zealand.